Configuring The Process View - ABB SM2000 User Manual

Advanced Videographic Recorder
SM2000

4.5.4 Configuring the Process View

Totalizer Tag Name
Totalizer Value
IM/SM2000 Issue 11
Alarms View – Totalizer Enabled
Alarm Tag
Statistics View – Totalizer Enabled
Channel Long Tag Name
Max
Values since last Totalizer Reset or Totalizer wrap.
Updated only if the Totalizer is Enabled and Running.
Alarms View or Statistics View – Totalizer not Enabled
Alarms View – Alarms A and B not Enabled
Alarm Trip Level
Min Average
Set to 'On' to enable the operator to display the Process view.
Select the Totalizer view to be displayed – Alarms or Statistics.
This setting can be changed by the Operator if 'View select
enable' is ticked below.
Select the menu items to be accessible from the Process view.
Message select enable
Enables the operator to activate one of 24 pre-configured
messages or a user-defined message.
Alarm acknowledge enable
Enables the Operator to acknowledge any alarms associated
with the current group.
Totalizer reset enable
Enables the Operator to reset the totalizers on any or all
channels.
Totalizer stop/go enable
Enables the Operator to stop and start totalizers on any or all
channels.
View select enable
Enables the Operator to select the Alarms and Statistics views.
Note. Menu items that are not enabled are greyed-out in the
Process view menu.
4 CONFIGURATION
Alarm Acknowledged
71