Configuring The Process View - ABB SM2000 User Manual

...4 CONFIGURATION

4.5.4 Configuring the Process View

Totalizer Tag Name
Totalizer Value
Process
Bar
Recording Chart
On
Process view enable
Statistics
Totalizer view select
1 2 3 X X
Menu enables
Process view enables
1. Message select enable
2. Alarm acknowledge enable
3. Totalizer reset enable
4. Totalizer stop/go enable
5. View select enable
54
Alarms View – Totalizer Enabled
Total Daily In Flow
Low In Flow Rate
0005402801
High In Flow Rate
litres
Alarm
Tag
Statistics View – Totalizer Enabled
Channel Long Tag Name
Total Daily In Flow
Storage Tank 1 In Flow
0005402801
225.4
litres
Max
Values since last Totalizer Reset or Totalizer wrap.
Updated only if the Totalizer is Enabled and Running.
Alarms View or Statistics View – Totalizer not Enabled
Low In Flow Rate
High In Flow Rate
Alarms View – Alarms A and B not Enabled
Total Daily In Flow
Storage Tank 1 In Flow
0005402801
litres
Digital Archive
In Flow
40
204.9
280
l/hr
Alarm Trip
Level
In Flow
204.9
110.9 201.0
l/hr
Min
Average
In Flow
40
204.9
280
l/hr
In Flow
204.9
l/hr
Set to 'On' to allow the operator to display the Process View.
Select the Totalizer View to be displayed – Alarms or
Statistics. This setting can be changed by the Operator if
'View select enable' is ticked below.
Select the menu items to be accessible from the Process
View.
Message select enable
Allows the Operator to activate one of six pre-configured
messages.
Alarm acknowledge enable
allows the Operator to acknowledge any alarms associated
with the current group.
Totalizer reset enable
Allows the Operator to reset the totalizers on any or all
channels.
Totalizer stop/go enable
Allows the Operator to stop and start totalizers on any or all
channels.
View select enable
Allows the Operator to select the Alarms and Statistics views.
Note. Menu items that are not enabled appear greyed-out
on the Process View menu.
Alarm Acknowledged