ABB SM3000 User Manual page 17

SM3000
Multipoint Videographic Recorder
IM/SM3000–EN Rev. L
Add one of 24 predefined Operator Messages (see Section 6.4.4, page 68) or one
User-Defined Message to the alarm event log.
If '< user defined >' is selected, a data entry keyboard first appears to enable the
message to be entered (see Fig. 6.5, page 56).
An 'Assign to group' dialog box then appears to enable the message to be assigned to
one or more Process Groups.
The selected or user-defined message is displayed briefly in the status bar. If Operator
Message annotation is selected (see 'Chart Annotation' on page 16) the message is also
added to the chart.
Note. When the instrument is in Historical Review mode, Operator Messages generated
are added at the current time, not the time indicated by the cursor.
4 Operation
15