ABB SM3000 User Manual page 40

SM3000
Multipoint Videographic Recorder
38
Select the Configuration Level – see Section 6, page 51.
Select the Setup Level – see Section 5, page 41.
Select the entries to be displayed in the log.  Indicates entries currently displayed.
Note.

Hiding and displaying log entries does not affect the recording of events in the log.

All selected alarm event transitions (from inactive to active, from active to
acknowledged, from acknowledged to inactive, from active to inactive) appear in
the sequence in which they occurred.

Selecting 'All Data' displays entries for all enabled group alarms and operator
messages.

Selecting 'Active Transitions Only' displays entries for alarms when made active
and hides all acknowledged & inactive transitions.
The Alarm Event log is not group specific therefore to acknowledge a particular alarm,
use the , and keys to select the relevant process group, followed by the
alarm to be acknowledged from the sub-sub-menu.
To acknowledge all active alarms in all process groups simultaneously, select 'All Groups'
and press the key.
To acknowledge all active alarms in the selected process group simultaneously, select
'All' and press the key.
Note. If an alarm in another process group is active, the Global Alarm status icon (
continues to be displayed in the status bar. If an active alarm in another process group is
unacknowledged, the icon is surrounded by a red flashing border (
The short channel tags of individual alarms that have not been configured are greyed-out
in the menu.
4 Operation
)
).
IM/SM3000–EN Rev. L