C1300
Advanced circular chart recorder
4 Mechanical Installation
4.1 Siting
A Close to Sensor
B At Eye-level Location
C Avoid Vibration
Fig. 4.1 General Requirements
Note. Remove knockouts by striking from the inside of
the case, taking great care not to damage any internal
components. Alternatively, drill out to 0.875 in.
(22.2mm) using a suitable drill bit.
60
Minimum
Sensor
0°C
(32°F)
Min.
A Within Temperature Limits
0 to 95% RH
0 to 80% RH
B Within Humidity Limits
+
C Use Screened Cables
Fig. 4.2 Environmental Requirements
4 Mechanical Installation
55°C
(131°F)
Max.
IM/C1300 Rev. J