Installation; Siting - ABB SM2000 User Manual

Advanced Videographic Recorder
SM2000

5 INSTALLATION

EC Directive 89/336/EEC
In order to meet the requirements of EC Directive 89/336/
EEC for EMC regulations, this product must not be used in
a non-industrial environment.
End of Life Disposal
The instrument contains a small lithium battery which
should be removed and disposed of responsibly in
accordance with local environmental regulations.
The remainder of the instrument does not contain any
substance that will cause undue harm to the
environment and must be disposed of in accordance
with the Directive on Waste Electrical and Electronic
Equipment (WEEE). It must not be disposed of in
Municipal Waste Collection.
Cleaning
Clean only the front panel, using warm water and a mild
detergent.
5.1 Siting – Figs. 5.1 and 5.2
Keep distance
to a minimum
A – Close to Sensors
B – At Eye-level Location
C – Avoid Vibration
Fig. 5.1 General Requirements
100
Sensors
(32°F)
A – Within Temperature Limits
0 to 95% RH
B – Within Humidity Limits
C – Environmental Limits
Warning. Select a location away from strong electrical
and magnetic fields. If this is not possible, particularly
in applications where
equipment is expected to be used, screened cables
within earthed metal conduit must be used.
D – Use Screened Cable
Fig. 5.2 Environmental Limits
5 INSTALLATION
50°C
(122°F)
Max.
0°C
Min.
IP66 / NEMA 4X front
IP40 rear (with extension)
IP20 rear (without extension)
+
mobile communications
IM/SM2000 Issue 11