Toro Reelmaster 03781 Operator's Manual page 12

Figure 4
1. Hood latch
2. Remove the 2 rivets securing the hood-latch bracket to
the hood (Figure 5).
2
Figure 5
1. Hood-latch bracket
3. Remove the hood-latch bracket from the hood.
4. While aligning the mounting holes, position the CE
lock bracket and the hood-latch bracket onto the hood.
Note: The lock bracket must be against the hood
(Figure 5).
Do not remove bolt and nut assembly from the
lock-bracket arm.
1
G012628
2. Rivets
1. CE lock bracket
g200373
5. Align the washers with the holes on the inside of the
hood.
6. Rivet the brackets and the washers to the hood
6).
7. Hook the latch onto the hood-latch bracket
1
1. Hood latch
g012628
8. Screw the bolt into the other arm of hood-lock bracket
to lock the latch in position
3
2
1. Bolt
2. Nut
12
1
2
G012629
Figure 6
2. Bolt and nut assembly
G012630
Figure 7
(Figure 8).
1
G012631
Figure 8
3. Arm of the hood-lock
bracket
g012629
(Figure
(Figure 7).
g012630
g012631