Toro Reelmaster 03781 Operator's Manual page 9

* This safety decal includes a slope warning required on the machine for compliance to the European Lawn Mower Safety Standard EN ISO 5395:2013. The conservative
maximum slope angles indicated for operation of this machine are prescribed by and required by this standard.
standard stability test in the static lateral and longitudinal tests with the maximum recommended slope indicated on the
decal. Review the instructions for operating the machine on slopes in the Operator's Manual and the conditions in which
the machine is being operated to determine whether the machine can be operated in the conditions on that day and at that
site. Changes in the terrain can result in a change in slope operation for the machine. If possible, keep the
cutting units lowered to the ground while operating the machine on slopes. Raising the cutting units while
1. Warning—read the Operator's Manual; do not operate the
machine unless you have received training.
2. Warning—read the Operator's Manual before towing the
machine.
3. Tipping hazard—do not turn at high speeds; do not drive up
or down slopes greater than 16 degrees; do not drive across
slopes greater than 22 degrees; lower the cutting units when
driving down slopes; use a roll over protection system and
wear the seat belt.
(Affix over Part No.
operating on slopes can cause the machine to become unstable.
120-1686
120-1683 for CE)
This machine complies with the industry
4. Warning—do not park the machine on slopes; engage the
parking brake, lower the cutting units, shut off the engine, and
remove the ignition key before leaving the machine.
5. Thrown object hazard—keep bystanders a safe distance
away from the machine.
6. Entanglement hazard, belt—stay away from moving parts,
keep all guards and shields in place.
9
decal120-1686