Huawei FusionModule500 User Manual page 74

FusionModule500 Smart Mini Data Center
User Manual
●
Do not tear down the transparent film from the glass door during the installation.
The film will be removed after the entire module is installed.
Procedure
Step 1 Use a pallet truck to transport the cabinet to the installation position.
Step 2 Check that the cabinet package is intact.
Step 3 Cut off and remove the binding straps, and remove the packing.
Step 4 Remove pallets from ordinary cabinets.
1.
2.
3.
4.
Issue 02 (2020-12-25)
If the cabinet installation environment is in poor condition, to well store the
cabinet after it is unpacked, take measures to prevent dust. You can wrap the
cabinet with the original plastic coat.
NO TICE
Remove the plastic bag and take out the fitting box.
Check the cabinet exterior for damage. If any damage is found, notify the
carrier immediately.
Check against the packing list that the equipment and fittings are correct and
complete. If some fittings are missing or do not comply with the packing list,
record the information and contact your local Huawei office immediately.
After checking that the cabinet is intact, remove the screw assemblies that
secure the cabinet to the pallet, as shown in
NO TICE
Set the screw assemblies aside for they will be used in installation steps.
Copyright © Huawei Technologies Co., Ltd.
4 Installation Guide
Figure 4-2.
64