FusionModule500 Smart Mini Data Center
User Manual
Procedure
Step 1 Install a hard disk.
1.
2.
3.
Issue 02 (2020-12-25)
Use a Phillips screwdriver to loosen three fastening screws (M3 x 6
countersunk screw, black) on the left and right of the subrack covers shown in
the lower-left figure.
Figure 4-71 Removing screws
Then loosen the three fastening screws (M3 x 5 grub screw, white) that are
used to connect the subrack bottom to the front panel. Remove the subrack
cover and front panel as shown in the lower-right figure.
Figure 4-72 Removing screws
Remove the chassis cover. Hold the chassis cover with one hand, and push the
chassis cover towards the front panel with the other hand. Then remove the
chassis cover with both hands.
Copyright © Huawei Technologies Co., Ltd.
4 Installation Guide
121