Huawei FusionModule500 User Manual page 188

FusionModule500 Smart Mini Data Center
User Manual
4.
5.
Step 5 Commission the cabinet electronic clasp locks.
Table 5-13 Function check
Function
View
cabinet
electroni
c clasp
lock
informati
on
Change
the
cabinet
electroni
c clasp
lock
name.
Remotely
open a
cabinet
electroni
c clasp
lock
Open
cabinet
electroni
c clasp
locks in
batches
a: Cabinet electronic clasp lock 1 is used as an example.
Step 6 When closing the door, rotate the lock handle vertically downward. If the door
cannot be opened or closed properly, locate the fault.
1.
Issue 02 (2020-12-25)
Click Test Connect to check whether the connection between the cabinet
electronic clasp lock and the ECC800-Pro is normal.
– If the connection is normal, click Confirm. The connected devices are
displayed in the Number of connected devices list.
– If the connection is abnormal, check whether the device is properly
connected to the ECC800-Pro, whether the device and the ECC800-Pro are
running properly, and whether the parameter settings are consistent with
the device parameters.
Repeat Step 4.3 and
Path
Choose
Monitoring >
Cabinet >
Global
cabinet >
Cabinet
Electronic
Clasp Lockn.
Choose Monitoring > Cabinet
and click the Controls tab.
Check whether there is friction between the lock tongue and the cabinet
electronic clasp lock. If so, adjust the installation position of the clasp lock.
Copyright © Huawei Technologies Co., Ltd.
Step 4.4 to connect other cabinet electronic clasp locks.
Click the
Running Info
tab.
Click the
Running
Parameters tab.
Click the
Controls tab.
5 Power-On Commissioning
Operation
View the running information
about cabinet electronic clasp
lock 1 on the WebUI.
Change the cabinet electronic
clasp lock name.
Select Open the door on
Controls, and click Submit to
remotely open the door.
Select Open front door or Open
back door from the Open the
door drop-down list box, select
the setting, and click Submit.
The cabinet electronic clasp locks
unlock the doors in batches
based on the signal value.
178