FusionModule500 Smart Mini Data Center
User Manual
3.
4.
5.
Figure 6-28 Connecting a conversion cable to a water detector
Step 2 Replace a water detection cable.
1.
2.
Issue 02 (2020-12-25)
Figure 6-27 Removing the cover from the water detector
Remove the bottom plate of the water detector from the binding position in
the cabinet.
Install a new water detector in the cabinet by referring to the preceding steps.
Connect the new water detector to the conversion cable.
Remove the faulty water detection cable from the port.
Install a new water detection cable.
Copyright © Huawei Technologies Co., Ltd.
6 O&M
287