Huawei FusionModule500 User Manual page 191

FusionModule500 Smart Mini Data Center
User Manual
●
Procedure
Step 1 Choose System Settings > Event Notification.
Step 2 Set related outbox parameters.
1.
2.
If Test email sending failed is displayed, check whether the receiver's email
server requires CA certificate verification. If it is required, download the CA
certificate from the receiver's email website and upload it in the Mailbox
Certificate area.
Figure 5-13 Email setting page
The following email addresses are for reference only (the actual parameters apply) and are used
only for configuring the email function.
Issue 02 (2020-12-25)
The ECC800-Pro is connected to a network with an email server through a
WAN port. Both the Internet and local area network (LAN) are supported.
Set related parameters in the Outbox Settings area on the Mailbox Settings
page. If the address type of the outbox is Domain name, choose System
Settings > System Parameters, and set related parameters in the DNS
Server Address area on the Monitor IP page.
NO TE
The DNS server address is provided by the local network operator.
Click Test to check the email sending. If an email fails to be sent, check the
outbox settings and DNS Server Address. If the email is sent successfully,
click Submit.
NO TICE
NO TE
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
181