How Can I Set The Date And Time; Adding A Southbound Device - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual
----End

5.3.4 How Can I Set the Date and Time?

Procedure
Step 1 Choose System Settings > System Parameters > Time.
Step 2 Set the time zone, date, and time, or click Obtain local time. Then, click Submit.
Step 3 (Optional) If you want to use the NTP server for time synchronization, select NTP
server sync. Enter NTP primary server IP, Whether the NTP master server is
authenticated, Key ID, and Key, and click Test to check whether the test is
successful. Enter NTP backup server IP, Whether the NTP backup server is
authenticated, Key ID, and Key, and click Test to check whether the test is
successful. Enter Port number and Sync interval (min), and click Submit.
----End

5.3.5 Adding a Southbound Device

Procedure
Step 1 Choose System Settings > Device Management > Add Device.
Step 2 After you add a device, date, and time based on the site requirements or click
Auto Discover Device, the details about the device connected to the smart
module are displayed.
Issue 02 (2020-12-25)
NO TE
– After the first login, change the password in time to ensure system access security.
– When the mobile phone app connects to the monitoring system, the WiFi function of
the monitoring system is disabled by default. Before connecting the mobile phone app
to the monitoring system, enable the WiFi function on the WebUI. For security, you are
advised to disable the WiFi function when the app is not in use.
– If a password is used for a long time, it may be stolen or cracked. The longer it is used,
the higher the risk of theft and cracking. Change the password once three months.
– You are advised to use a mobile phone that has not been rooted to reduce the risk of
information leakage.
– It is recommended that you use different user names to log in to both the ECC800-Pro
WebUI and app at the same time. If you use the same user name to log in to the
WebUI and app at the same time, either of them will be forcibly logged out.
– The iDCService app supports only the Android system.
– The iDCService app is available only in Chinese.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
169