Table of Contents
Advertisement
- If you have adjusted the compartment at right
or left chiller zone compartment, you can not
slide it to right or left. If you slide it, since it
becomes far away from the air channel, required
coldness can not be achieved in this
compartment.
WARNING! Lood food chiller zone/second
layer crisper according to your selection (crisper
or chiller zone). Otherwise your food may face
extra cooling or insufficient cooling.
You can also move chiller zone/second layer
crisper compartments as shown in Fig.10-11
Beverage bin
This feature is designed for horizontal storage
of bottles. You can slide beverage bin in the
horizontal direction to adjust the useful space
below it.
When you want remove the beverage bin,
remove the glass shelf from the cabinet. Then
by sliding the beverage bin to left you can
remove it. To fit it back perform the above
action in reverse order (Fig.9).
Ice-matic
Fill the ice-matics with water and put them in
place. Your ice will be ready in about two
hours. You needn't take the ice-matic out in
order to get ice; just turn it 90° to the right,
and the ice will drop into the ice-bowl below.
Then take out the ice-bowl to serve the ice. If
you wish, you can leave the ice in the bowl for
a while (Fig. 15-16).
Attention! The ice-bowl is only meant for
collecting ice. If you put water in, it will break.
Instructions for use
Replacing the interior
light bulb
Should the light fail, switch off at the socket
outlet and pull out the mains plug.
Then ensure the bulb is screwed securely in the
bulb holder. Replace the plug and switch on.
If the light still fails, obtain a replacement E14
screw-cap type 15 Watt (Max) bulb from your
local electrical store and then fit it. Carefully
dispose of the burnt-out light bulb immediately.
Cleaning and care
1. We recommend that you switch off the
appliance at the socket outlet and pull out the
mains plug before cleaning.
2. Never use any sharp instruments or abrasive
substances, soap, household cleaner, detergent
or wax polish for cleaning.
3. Use luke warm water to clean the cabinet
of the appliance and wipe it dry.
4. Use a damp cloth wrung out in a solution
of one teaspoon of bicarbonate of soda to one
pint of water to clean the interior and wipe it
dry.
5. Make sure that no water enters the
temperature control box.
6. If the appliance is not going to be used for
a long period of time, switch it off, remove all
food, clean it and leave the door ajar.
7. We recommend that you polish the metal
parts of the product (i.e. door exterior, cabinet
sides) with a silicone wax (car polish) to protect
the high quality paint finish.
8. Check door seals regularly to ensure they
are clean and free from food particles.
9. Never:
• Clean the appliance with unsuitable material;
e.g. petroleum based products.
• Subject it to high temperatures in any way,
• Scour, rub etc., with abrasive material.
10. Removing the door shelves :
• To remove a door shelf, remove all the
contents and then simply push the door shelf
upwards from the base.
6
Advertisement
Table of Contents
