Table of Contents
Advertisement
Trouble - shooting
If the appliance does not operate when switched
on, check;
• That the plug is inserted properly in the socket
and that the power supply is on. (To check the
power supply to the socket, plug in another
appliance)
• Whether the fuse has blown/circuit breaker
has tripped/main distribution switch has been
turned off.
• That the temperature control has been set
correctly.
• That the new plug is wired correctly, if you
have changed the fitted, moulded plug.
If the appliance is still not operating at all after
above checks, contact the dealer from whom
you purchased the unit.
Please ensure that above checks have been
done, as a charge will be made if no fault is
found.
Repositioning the
doors
(Fig.17)
•Switch off at the socket outlet and pull out
the mains plug.
•Remove all food, loose items and fittings from
the appliance and door shelves.
•Unscrew the bolts and remove the middle
hinge while holding doors. (1)
•Remove the freezer compartment door from
the top hinge by sliding down and pulling
front. (2)
•Remove the fresh food compartment door by
pulling up. (3)
•Remove the plastic covers on the front top
trim. (4)
•Unscrew the bolts of the top hinge and remove
top hinge. (5)
•Reposition plugs on the opposite side. (6)
•Remove the front bottom trim. (7)
Instructions for use
•Carefully lay the appliance on its back. (8)
(You may need somebody to help you.)
•Unscrew and remove the left hand side front
feet. (9)
•Unscrew and remove the bottom hinge. (10)
•Reposition the plastic covers on top of fresh
food door to the opposite side. (11)
•Unscrew and remove the middle hinge
bushing from freezer door. (12)
•Screw and fix the new middle hinge bushing
which is supplied in IB bag to the other side.(13)
•Reposition the hinge bushing and the tap on
the fresh food door. (14)
•Unscrew and reposition the bottom hinge
bushing. (15)
•Unscrew bolt of the pin on the bottom hinge.
Fit the pin to the other hole on the hinge and
tighten the bolt on the new position. (16)
•Fit the bottom hinge and other feet, and
tighten the screws. (17)
•Remove the plastic tap to the opposite side
on the front bottom trim. (18)
•Fit the front bottom trim to the bottom hinge
and other feet. (19)
•Rotate the top hinge 180°. Unscrew the hinge
pin and re-tighten it to the opposite side (20)
•Fit the top hinge and tighten the bolts. (21)
•Fit the plastic cover on the front top trim. (22)
•Locate the fresh food door to the bottom
hinge and attach to the cabinet. (23)
•Locate the middle hinge on the fresh food
door (24) and put the freezer door between
the top and middle hinge carefully. (25)
•Fit the middle hinge. Adjust the doors and
tighten the bolts. (26)
•Carefully stand your appliance (you may
need somebody to help you) adjust the front
feet.
•Remove the plastic plugs on the doors.
Unscrew the door handles. Reposition
the door handles on the other side. Tighten
the screws and fit the plastic plugs. (27)
•Put back all, loose items and fittings.
•Wait for at least 4 hours to allow the system
to settle before switching on.
8
Advertisement
Table of Contents
