General Information; Traction Unit Operator's Manual And Accessory Installation Instructions; Relieving Pressure From The Hydraulic System - Toro Sand Pro 3040 Service Manual

General Information

Traction Unit Operator's Manual and Accessory Installation
Instructions

Relieving Pressure from the Hydraulic System

Sand Pro ® 3040 and 5040
20251SL Rev A
The traction unit Operator's Manual and accessory Installation Instructions
provide information regarding the operation, general maintenance and
maintenance intervals for the machine and its accessories. Refer to the traction
unit Operator's Manual and accessory Installation Instructions for additional
information.
Release all the pressure in the hydraulic system before you work on the hydraulic
system.
Note: If you park the machine on an incline or slope, the pressure in the traction
circuit does not release.
1. Park the machine on a level surface.
2. Lower any attachments completely (float).
3. Turn the key switch to the O
4. Move the traction pedal in both the F
5. On model 08745 machines, turn the steering wheel in both the left and the
right directions.
position and allow the engine to stop.
FF
ORWARD
Page 5–3
and R direction.
EVERSE
Hydraulic System: General Information