General Information; Traction Unit Operator's Manual; Briggs & Stratton Service Manual - Toro Sand Pro 3040 Service Manual

General Information

Traction Unit Operator's Manual

Briggs & Stratton Service Manual
Engine: General Information
This chapter gives information about specifications and repair of the Briggs
& Stratton gasolinelengine used in the Sand Pro 3040/50400 machines.
The general maintenance procedures are described in the Toro traction unit
Operator's Manual. Detailed information on engine troubleshooting, testing,
disassembly, and assembly is identified in the Briggs & Stratton V-Twin Engine
Service Manual.
Additionally, some engine repair procedures are described in this manual. The
described adjustments and repairs require tools which are commonly available
in many service shops. Special tools are described in the Briggs & Stratton
V-Twin Engine Service Manual. The use of some specialized test equipment is
explained. However, the cost of the test equipment and the specialized nature of
some repairs may dictate that the work be done at an engine repair facility.
Service and repair parts for the Briggs & Stratton engines are supplied through
your Authorized Toro Distributor. If the parts list is not available, provide your
distributor with the Toro model and serial number of your machine as well as the
Briggs & Stratton engine model and serial numbers.
The traction unit Operator's Manual provides information regarding the operation,
general maintenance, and maintenance intervals for your machine. Refer to
the traction unit Operator's Manual for additional information when servicing
the machine.
The engine that powers the Sand Pro 3040 (model 08743) is a 16 horsepower
Briggs & Stratton Model 305447 Type 0588. The engine that powers the Sand
Pro 5040 (model 08745) is a an 18 horsepower Briggs & Stratton Model 356447
Type 0636. The Briggs & Stratton V-Twin Engine Service Manual is available
for these engines.
Page 4–2 Sand Pro ® 3040 and 5040
20251SL Rev A