Toro 08761 Operator's Manual

QAS Nail Drag
Sand Pro
Model No. 08761—Serial No. 270000001 and Up
Introduction
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit www.Toro.com for more information, including
safety tips, training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
1. Model and serial number location
Model No.
Serial No.
© 2020—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® /Infield Pro
Figure 1
Figure 1
Register at www.Toro.com.
® 3040 and 5040 Traction Unit
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure 2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
g006212
Original Instructions (EN)
Form No. 3443-815 Rev A
Operator's Manual
Figure 2
Safety-alert symbol
*3443-815*
Printed in the USA
All Rights Reserved
g000502