Huawei New Main Way 2.0 User Manual page 80

New Main Way 2.0
User Manual
Step 2 Install cables at a round connector.
1.
2.
3.
4.
5.
6.
7.
8.
Figure A-4 Installing cables at a round connector
----End
Issue 05 (2020-10-15)
Figure A-3 Crimping a cord end terminal
(1) Heat shrink tubing with
adhesive
Remove the rear cover from the round connector.
Loosen the screw on the cable clip.
Route the cables through the rear cover.
Insert cables into the round connector.
Tighten the screws to secure each cable.
Reinstall the rear cover.
(Optional) Seal the holes where no cables are installed.
Tighten the screw on the cable clip to the required torque. Gaps are allowed
on both sides of the cable clip.
Copyright © Huawei Technologies Co., Ltd.
(2) Cable
A Preparing Load Cables
(3) Heat gun
74