Huawei New Main Way 2.0 User Manual page 37

New Main Way 2.0
User Manual
Figure 3-27 Installing the connective kit
(1) Protective cover
Step 9 Install other supports and busbar trunking units.
If the installation cannot be completed at a time, protect the port for connecting
to the busbar trunking unit from sundries and dust. Otherwise, the internal copper
bar may short-circuit.
Step 10 Remove the protective cover from the busbar trunking unit.
At least two protective covers are required between the power distribution units,
and between the power distribution unit and the general input unit.
Figure 3-28 Installing one power distribution unit
(1) Position for removing the protective cover
Issue 05 (2020-10-15)
(2) Busbar trunking
unit
NO TICE
NO TICE
Copyright © Huawei Technologies Co., Ltd.
(3) Connective kit
3 Installation
(4) 19# socket
31