Huawei New Main Way 2.0 User Manual page 62

New Main Way 2.0
User Manual
Step 4 Remove the input protective cover and use a multimeter to check that the input
terminal is not energized.
Figure 8-2 Removing the protective cover
Step 5 Remove the input power cable from the general input unit and mark the
installation position.
Step 6 Remove the connective kit between the general input unit and the busbar
trunking unit.
Figure 8-3 Removing the connective kit
Step 7 Remove the bolts and the general input unit.
Figure 8-4 Removing the bolts
(1) Support fastener
Step 8 Secure the new general input unit.
Issue 05 (2020-10-15) Copyright © Huawei Technologies Co., Ltd.
8 Parts Replacement
56