Installing The Nmw - Huawei New Main Way 2.0 User Manual

New Main Way 2.0
User Manual

3.3.1.2 Installing the NMW

Procedure
Step 1 After determining the position for installing the first support, use a laser locator to
locate the positions of other supports. Ensure that they are arranged neatly.
Step 2 Secure the supports.
● The following procedure describes how to install a low support that applies to
● If there are bolts in the holes for securing the supports, remove the bolts and
● If the cabinet edges are uneven, secure the supports to the higher cabinet edge
Figure 3-20 Installation on the first cabinet
(1) Door box
Issue 05 (2020-10-15)
NO TICE
the scenario of maintenance on both sides.
then secure the supports.
and use a laser locator to ensure that the adjacent supports are flush in the
front and rear directions.
(2) Rodent-proof mesh (3) Support connective
Copyright © Huawei Technologies Co., Ltd.
kit for the general
input unit
3 Installation
(4) Support
27