Names Of Each Part Of The Robot - Mitsubishi Electric MELFA CR800 Series Special Specifications Manual

2.3 Names of each part of the robot

Brake release switch
ブレーキ解除スイッチ
View A
Note 1) The operation method of the brake release switch.
The brake of the J3 axis can be released by operating this switch.
When releasing the brake, please provide support or take other recaution to prevent the falling of J3 axis.
CAUTION
(1) Provide support or take other recaution to prevent the falling of J3 axis.
(2) Push the brake release switch. The brake is released while the switch is pressed in.
Fig.2-12 ： Names of each part of the robot
When releasing the brake the J3 axis will drop. To ensure safety, take appropriate
measures such as supporting the axis to avoid the free fall.
A
Note1)
Names of each part of the robot
２ Robot arm
2-26