Positioning The Standard Seat; Raising And Lowering The Seat - Toro Groundsmaster 360 Operator's Manual

seat. On 2-wheel-drive machines, the engine
should stop within 2 seconds. On 4-wheel-drive
machines, the cutting unit shuts off and the
engine continues to run.
4. Without sitting on the seat, engage the parking
brake, move the PTO switch to the
and move the traction pedal to the N
position. Now start the engine. While the engine
is running, press the traction pedal; the engine
should shut off within 2 seconds.
5. Without an operator on the seat, disengage the
parking brake, move the PTO switch to off, and
allow the traction pedal to return to the N
position. Try starting the engine; the engine
should not start.
Positioning the Standard
Seat
Changing the Seat Position
The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable.
1. To adjust the seat, move the lever sideways to
unlock the seat (Figure
Figure 17
1. Backrest knob
2. Seat-suspension knob
2. Slide the seat to the desired position and release
the lever to lock the seat in position.
3. Verify that the seat has locked into place by
attempting to move it back and forth.
position,
OFF
EUTRAL
EUTRAL
17).
g004478
3. Lumbar-support-adjustment
knob
4. Seat-position-adjustment
lever
Changing the Seat Suspension
You can adjust the seat to provide a smooth and
comfortable ride. Position the seat where you are
most comfortable.
Without sitting on the seat, turn the knob in front in
either direction to provide the best comfort
1. Seat-suspension knob
Changing the Back Position
You can adjust the back of the seat to provide a
comfortable ride. Position the back of the seat where
it is most comfortable.
To adjust the back of the seat, turn the knob, located
under the right-side armrest, in either direction to
provide the best comfort
Changing the Lumbar Support
You can adjust the back of the seat to provide a
customized lumbar support for your lower back.
To adjust the back of the seat, turn the knob, under
the left-side armrest, in either direction to provide the
best comfort (Figure
Raising and Lowering the
Seat
To access the hydraulic and other systems under the
seat, you must unlatch the seat and swing it forward.
1. Move the seat latch, located on the left side of
the seat, rearward to unlatch the seat and pull
forward on the top of the seat
24
(Figure
Figure 18
2. Operator-weight setting
(Figure 17).
17).
(Figure
17).
g004489
19).