Pre-Maintenance Procedures; Using The Hood-Prop Rod - Toro Groundsmaster 360 Operator's Manual

Notation for Areas of Concern
Inspection performed by:
Item
Pre-Maintenance
Procedures
CAUTION
If you leave the key in the key switch,
someone could accidently start the engine
and seriously injure you or other bystanders.
Remove the key from the key switch before
you do any maintenance.

Using the Hood-Prop Rod

1. Release the hood latches.
2. Lift up the hood until you can position the prop
rod behind the frame tube
3. Lower the hood until the prop rod is in front of
and resting against the frame tube.
4. To lower the hood, raise the hood until you can
raise the prop rod above the frame tube, then
lower the hood.
5. Secure the hood latches.
1. Prop rod
(Figure 65).
Figure 65
Date
g015806
48
Information