Toro Groundsmaster 360 Operator's Manual page 67

2. Change the engine oil and filter; refer to
Changing the Engine Oil and Filter (page
3. Fill the engine with the designated quantity of
engine oil; refer to
Level (page 52).
4. Start the engine and run it at idle speed for 2
minutes.
5. Drain the fuel from the fuel tank, fuel lines,
pump, filter, and separator. Flush the fuel tank
with clean diesel fuel and connect all fuel lines.
6. Thoroughly clean and service the air-cleaner
assembly.
7. Seal the air-cleaner inlet and the exhaust outlet
with weatherproof masking tape.
8. Check the oil-filler cap and fuel-tank cap to
ensure that they are securely in place.
Checking the Engine-Oil
52).
67