Accessing The Hood; Raising And Lowering The Seat Assembly; Removing A Bucket Seat - Toro 07411EX Operator's Manual

Accessing the Hood

Raising the Hood
1. Lift up the handle of the rubber latches on each
side of the hood (Figure
Figure 23
2. Raise the hood.
Closing the Hood
1. Gently lower the hood.
2. Secure the hood by aligning the rubber latches
onto the latch anchors on each side of the hood
(Figure 23).
Raising and Lowering the
Seat Assembly
To raise the seat assembly, push the seat assembly
forward until it rests on the steering wheel
To lower the seat assembly, push the seat assembly
rearward until it seats back into the original position
(Figure 24).
All manuals and user guides at all-guides.com
23).
g034045
(Figure 24).

Removing a Bucket Seat

1. Push the seat assembly forward to the raised
position (Figure
2. Slide the seat assembly to the side out of the
pins, and lift the seat assembly upward
25).
1. Pins
29
Figure 24
24).
Figure 25
g190066
(Figure
g190187