Rear-Seat Handle; Hold-Down Strap; Countersunk Screw (1/4 Inch); Figure 12 - Toro Workman GTX Installation Instructions Manual

Folding the Rear-Facing Seat
1. Remove the rear-seat handle and lay it flat on the footrest lining up the tab on the handle with the handle
hole on the footrest
2. Secure the handle to the footrest using the hold-down strap and countersunk screw on the rear-seat
handle (Figure 12).

1. Rear-seat handle

2. Hold-down strap

3. Handle hole
3. Rotate the seat forward and remove the quick pin
1. Quick pin
(Figure 12).

Figure 12

4. Notch
5. Countersunk screw
(Figure 13).
Figure 13
7
g244241
g244252