Maintenance; Maintenance Safety; Recommended Maintenance Schedule(S) - Toro Groundsmaster 360 Operator's Manual

Maintenance

Note:
Determine the left and right sides of the machine from the normal operating position.
Download a free copy of the electrical or hydraulic schematic by visiting www.Toro.com and searching for your
machine from the Manuals link on the home page.

Maintenance Safety

•
Before you leave the operator's position, do the
following:
– Park the machine on a level surface.
– Disengage the power takeoff and lower the
attachments.
– Engage the parking brake.
– Shut off the engine and remove the key (if
equipped).
– Wait for all movement to stop.
•
Allow machine components to cool before
performing maintenance.
•
If the cutting units are in the transport position, use
the positive mechanical lock (if equipped) before
you leave the machine unattended.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 10 hours
After the first 200 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 200 hours
Maintenance Procedure
• Check the tension of the alternator belt.
• Check the belt tension on the air-conditioning compressor.
• Torque the wheel-lug nuts.
• Change the hydraulic fluid and filter.
• Test the safety system.
• Check the air-cleaner indicator.
• Check the engine-oil level.
• Drain water or other contaminants from the water separator.
• Check the engine-coolant level.
• Clean the radiator with compressed air (do not use water). Clean the radiator more
frequently in extremely dusty and dirty conditions.
• Check the level of the hydraulic fluid.
• Clean the machine.
• Clean and maintain the seat belt.
• Grease the bearing and bushing grease fittings. Grease the bearing and bushing
grease fittings more frequently in extremely dusty and dirty conditions.
• Check battery cable connections.
• Check the tire pressure.
• Clean the air-conditioning coil. Clean the air-conditioning coil more frequently in
extremely dusty or dirty conditions.
• Check the tension of the alternator belt.
• Check the belt tension on the air-conditioning compressor.
• Inspect the cooling-system hoses and seals. Replace them if they are cracked or
torn.
• Torque the wheel-lug nuts.
•
If possible, do not perform maintenance while the
engine is running. Keep away from moving parts.
•
Support the machine with jack stands whenever
you work under the machine.
•
Carefully release pressure from components with
stored energy.
•
Keep all parts of the machine in good working
condition and all hardware tightened, especially
blade-attachment hardware.
•
Replace all worn or damaged decals.
•
To ensure safe, optimal performance of the
machine, use only genuine Toro replacement
parts. Replacement parts made by other
manufacturers could be dangerous, and such use
could void the product warranty.
45