Toro 07161 Installation Instructions Manual page 4

2
Removing the Seat
Assembly, Handholds,
Side Panels, and Rubber
Covers
No Parts Required
Removing the Seat Assembly
1. Push the seat assembly forward to the raised
position.
2. Slide the seat assembly to the side out of the
pins, and lift the seat assembly upward
2).
1. Pins
Removing the Handholds
Remove the 3 flange bolts (5/16 x 3/4 inch) and 3
flange nuts (5/16 inch) securing the right and left
handholds; remove the handholds
Figure 4).
Figure 2
(Figure 3 and
1. Left handhold
(Figure
2. Flange bolt (5/16 x 3/4
inch)
g190187
1. Right handhold
2. Flange bolt (5/16 x 3/4
inch)
4
Figure 3
Left Handhold Shown
3. Flange nut (5/16 inch)
Figure 4
Right Handhold Shown
3. Flange nut (5/16 inch)
g036760
g036761