Table of Contents
Advertisement
Important:
Apply thread-locking compound
to the hex-flange bolts before installing.
Important:
Ensure that the plastic washers
are installed onto the top and bottom of the
sunshade, as this prevents damaging the
sunshade.
Figure 65
1. Hex-flange bolt (1/4 x 1
inch)
2. Sealing washer
3. Friction washer
g036571
4. Plastic washer
5. Flange bushing
6. Rear crosslink
16
Completing the Installation
No Parts Required
Procedure
For Electric Machines
Connect the battery; refer to your machine Operator's
Manual.
Note:
Correctly follow the procedure for connecting
the batteries. Connect the main positive-battery cable
(red), then connect the main negative-battery cable
(black).
For Gasoline Machines
1.
Secure the battery base on the right side using
the previously removed 2 flange-head bolts
(5/16 x 3/4 inch) as shown in
Removing the Side Panels (page
2.
Connect the positive (+) battery cable to the
battery using the bolt and nut
3.
Connect the negative (–) battery cable to the
battery using the bolt and nut
29
Figure 11
of
6).
(Figure
10).
(Figure
10).
Advertisement
Table of Contents
