No Parts Required - Toro 07161 Installation Instructions Manual

9
Removing the Hood and
Bumper

No Parts Required

Removing the Hood from the
Machine
1. Lift up the handle of the rubber latches at each
side of the hood
Figure 40
2. Rotate the hood forward.
3. While supporting the hood, push the pivot latch
inward and move the hood rearward until the
clevis pin of the hood clears the latch
41).
(Figure 40).
(Figure
1. Pivot latch
4. Repeat step
5. Remove the hood from the machine.
g034045
20
Figure 41
2. Clevis pin
3 at the other side of the hood.
g237474