13
Installing the Windshield
Parts needed for this procedure:
1
Windshield
8
Shoulder bolt (5/16 x 1-1/4 inches)
5
Hex-head flange bolt (1/4 x 1-1/2 inches)
16
Rubber bushing
8
Backup washer
1
Windshield support assembly
1
Windshield bracket
8
Nut (5/16 inch)
5
Nut (1/4 inch)
1. Shoulder bolt (5/16 x 1-1/4 inches)
2. Backup washer
Procedure
1.
Use 1 hex-head flange bolt (1/4 x 1-1/2 inches)
and 1 nut (1/4 inch) to secure the windshield
bracket to the windshield support assembly
(Figure
61).
1. Hex-head flange bolt (1/4
x 1-1/2 inches)
2. Nut (1/4 inch)
2.
Use 4 hex-head flange bolts (1/4 x 1-1/2 inches)
and 4 nuts (1/4 inch) to secure the windshield
support assembly to the right and left windshield
supports
(Figure
3.
Install the windshield with 8 shoulder bolts (5/16
x 1-1/4 inches), 8 backup washers, 16 rubber
bushings, and 8 nuts (5/16 inch) as shown in
Figure
62.
Figure 62
3. Rubber bushing
4. Windshield
27
Figure 61
3. Windshield support
assembly
4. Windshield bracket
61).
g214632
g214631