Cutting and Installing the Rubber Covers
1.
Cut the rubber covers using the measurements shown in
Note:
The cuts in the rubber cover allow for space to install the ROPS brackets.
1. Location of cut
2.
Install each rubber cover using the previously removed 10 plastic rivets and a cable tie
Note:
If the previously removed rivets are damaged or missing, replace them with the rivets provided
in this kit.
1. Plastic rivet (10)
2. Rubber cover
Figure
22.
Figure 22
Figure 23
Left Side Shown
3. Cable tie
11
g217562
(Figure
23).
g217602