Electrical System Maintenance; Replacing The Rear-Facing Side Bulbs; Replacing The Side-Facing Bulbs; Replacing The Front Amber Bulbs - Toro MMX-650E-S 60212C Operator's Manual

Electrical System
Maintenance
Replacing the Rear-Facing
Side Bulbs
Note: The left, rear-facing bulb also illuminates license plate.
1. Use a screwdriver to remove the 4 screws from the
large square lens on the light
A B
D E
Figure 35
2. Remove the lens (Figure
3. Push and twist the bulb counterclockwise to remove it
from the socket (Figure
4. Push a new 1157 bulb into the socket and then twist it
clockwise (Figure 35).
5. Install the lens and the 4 screws
Replacing the Side-Facing
Bulbs
1. Use a screwdriver to remove the 2 screws from the lens
on the side of the light
A B
D E
Figure 36
(Figure 35).
C
F
G020829
35).
35).
(Figure 35).
(Figure 36).
C
F
G020830
2. Remove the lens
3. Pull the bulb out of the socket
4. Push a new 168 bulb into the socket
5. Install the lens and the 2 screws
Replacing the Front Amber
Bulbs
1. Using a screwdriver, remove the 2 screws from the
amber lens on the front of the light
2. Remove the amber lens
3. Pull the bulb out of the socket
4. Insert a new 193 bulb into the socket
5. Install the amber lens and the 2 screws
25
(Figure 36).
(Figure 36).
(Figure
(Figure 36).
(Figure
Figure 37
(Figure 37).
(Figure 37).
(Figure
(Figure
36).
37).
37).
37).