Toro MMX-650E-S 60212C Operator's Manual page 5

•
Keep the cowl closed and latched during operation.
•
Ensure that all the guards and shields are securely in place
before operating the machine.
•
Ensure that the O /O
N
before connecting the machine to the electrical source.
•
If the mixing paddles strike a foreign object or if the
machine should start making an unusual noise or
vibration, stop the motor and empty the drum. Wait for
all moving parts to come to a complete stop and cool.
Vibration is generally a warning of trouble. Inspect for
clogging or damage. Clean and repair and/or replace
damaged parts.
•
Lightning can cause severe injury or death. If you see
lightning or hear thunder in the area, do not operate the
machine; seek shelter.
switch is in the O position
FF FF
Maintenance and Storage
•
Before performing maintenance, do the following:
– Park the machine on level ground.
– Stop the motor. Wait for all movement to stop before
adjusting, cleaning, or repairing.
– Let the motor cool before performing maintenance
or storing the machine.
– Unplug the machine before making any repairs.
•
Never lubricate, service, repair, or adjust the machine
while it is running.
•
Keep equipment materials clear from the motor.
•
Never allow untrained personnel to service the machine.
•
Keep hands, feet, and clothing away from moving parts.
If possible, do not make adjustments with the motor
running.
•
Keep all parts in good working condition and all hardware
tightened. Replace all worn or damaged decals.
•
Remove any buildup of grease, oil, or debris from the
machine.
•
Do not modify the electrical connectors or wiring.
•
Do not connect the ground circuit of the machine to the
energized circuit of the electrical source.
•
Do not tamper with safety devices.
•
Chock the tires when storing the machine.
•
Keep all nuts, bolts, screws, and hose clamps securely
tightened. Keep equipment in good condition.
•
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement parts
and accessories made by other manufacturers could be
dangerous, and such use could void the product warranty..
5