Cleaning; Cleaning The Machine; Storage; Storing The Machine - Toro MMX-650E-S 60212C Operator's Manual

Cleaning

Cleaning the Machine

Regular cleaning and washing increases the life span of the
machine. Clean the machine after each use, before the dirt
hardens.
Ensure that the motor is unplugged.
Use care when using a high-pressure sprayer because it can
damage warning decals, instruction signs, and the motor.
Important: Use pressure sprayers to clean only the
drum of the machine. Clean off the rest of the machine
by hand to keep the motor from getting wet.
Important: Lubricate the trunnions after cleaning; refer
to Lubricating the Bearings and Seals (page

Storage

Storing the Machine

For storage over 30 days, prepare the machine as follows:
1. Move the O
unplug the power cord.
2. Remove dirt and grime from the external parts of the
entire machine, especially the motor.
Important: You can wash the machine with mild
detergent and water.
3. Grease the machine; refer to
and Seals (page 23)
(page
4. Check and tighten all bolts, nuts, and screws. Repair or
23).
replace any part that is damaged.
5. Paint all scratched or bare metal surfaces with paint
from your Authorized Toro Dealer.
6. Store the machine in a clean, dry garage or storage area.
7. Cover the machine to protect it and keep it clean.
33
/O switch to the O
N FF
Lubricating the Bearings
and Lubricating the Drive Chain
24).
position, and
FF