5. Ensure that the drum latch is engaged and that the
drum does not rotate toward the dump position.
Opening and Closing the Cowl
Opening the Cowl
1. At the side of the machine where the front cowl and
rear cowl meet, grasp the latch and pull it off from the
latch anchor on the rear cowl (B of
A
1
C
3
4
1. Latch
2. Latch anchor
2. Repeat step
1
on the opposite side of the machine.
3. At the back of the machine where the rear cowl meets
the frame of the machine, grasp the latch and pull it off
from the latch anchor on the cowl (B of
4. Rotate the rear cowl up and forward until it is fully
positioned on top of the front cowl (D of
Closing the Cowl
1. Rotate the rear cowl rearward and down until the
receiver at the bottom center of the cowl is aligned with
the V-fitting and flush on the frame of the machine
(D of
Figure
25).
2. At the back of the machine, grasp the latch and pull it
onto the latch anchor on the rear cowl.
3. At the side of the machine, grasp the latch and pull it
onto the latch anchor on the rear cowl (B of
Figure
25).
B
1 2
D
g020906
Figure 25
3. Receiver
4. V-fitting
Figure
Figure
4. Repeat step
Figure
25).
25).
Figure
25).
17
3
at the opposite side of the machine (B of
25).