B
III
/
e
Ike
BasIC
CoMfort
v
ery IMportant servICe note
• When work at the bottom of the eBike III is required (e g access to electronic moduls, exchange
of load unit or installation of COM module) the eBike III should be carefully placed on one side
by grabbing it at the handlebar and the saddle
• DO NOT tilt the eBike III forward to stand on the handlebar - this is an unsecure and instable
position!
p
M
reventIve
aIntenanCe
•
eBike III basic / comfort is a protection class II device (no connection to protective ground)
•
Preventive maintenance is recommended to be performed every 2 years
f
Inal CHeCkout proCedure
1. Check the setup for stability, adjust with leveling device if required.
Expected result:
2. Visually inspect the device:
- inspect cables / power cord
Expected result:
- 8 -
Warning
• Hazard, Equipment Damage
/ f
unCtIonal test
No instability
No damage or wear detected
eBike III basic / comfort
Note
Pass/Fail
Pass/Fail
2018111-336 Rev. B