Dismount Pedal Cranks - GE eBike III basic Series Service Manual

d
IsMount pedal Cranks
1. Carefully lift the protective cover off the crank, using a
small flat screw driver.
2. Plug the crank extractor onto the screw of the crank.
3. Loosen the screw with a wrench (17 mm).
4. Remove the screw and the lock washer.
(When mounting the cranks after repair use a torque
wrench to tighten the screw with a torque of
40 Nm.)
5. Turn the crank extractor and securely tighten the
screw completely (!!) into the winding of the crank
screw.
6. Use a wrench (17 mm) to remove the crank by
screwing the bolt onto the axis.
2018111-336 Rev. B eBike III basic / comfort - 41 -