Remove Ergometer Housing; Plastic Screw Seals (Caps) - GE eBike III basic Series Service Manual

r e H
eMove rgoMeter
p (
lastIC sCrew seals Caps
The screws fixing the plastic housing parts of the eBike
III basic and eBike III comfort are covered by small plastic
caps.
Due to the different screw sizes there are 5 different caps
used. The different caps are marked with small slots from
cap type 0 (no slot) up to cap type 4 (4 slots) - see picture.
The caps can only be removed by destroying them.
Before removing plastic parts of the housing, be sure to
have spare plastic caps available (PN 2018111-335).
2018111-336 Rev. B
ousIng
)
eBike III basic / comfort
p
laStic cap with marking SlotS
cap type
handlebar housing
cap type
eBike III basic
eBike III comfort
cap type
eBike III comfort
cap type
eBike III comfort
cap type
eBike III basic
( 4)
type
0
1
2
3
4
- 39 -