p
ower supply unIt replaCeMent
1. The power supply is mounted in the rear of the
ergometer.
2. Remove the mounting bracket (2 screws).
3. Replace the power supply unit and secure the
mounting bracket again.
4. Remove the power supply cable from the main switch
and connect the cable of the new power supply
accordingly
5. Secure the cables with a cable strap
When reassembling the housing:
6. Slide the plastic cover of the power switch in the
appropriate slot in one side part of the housing.
7. During assembly of the side parts take care, that
the plastic cover of the main switch fits into the
corresponding slot of the other side part.
2018111-336 Rev. B
eBike III basic / comfort
- 57 -