Manual Load - GE eBike III basic Series Service Manual

M l
anual oad
A manual load can be set between 1 - 999 Watt.
Use the arrow keys and set the desired value by pressing
NIBP.
Pressing NIBP at 0 Watt (EXIT) returns to the service menu.
s C .
ysteM onfIg
The hardware configuration of the ergometer is defined in
this setup.
Select the module / option and change the setting to I
if the module is integrated in the actual ergometer.
The last selection "EXIT" returns to the service menu.
- 66 -

Manual load

Manual load
System Config.
Saddle engine
NIBP-Modul
Analog Interface
EXIT
S
ettting of ergometer configuration
• "Analog Interface" is set to "I" only if a MAC5500 is
connected to the eBike III
In conjunction with this setting, a special adapter
(COM module PN 2018111-340) has to be installed to add
an analog interface to the eBike III
eBike III basic / comfort
75 Watt
0 Watt
EXIT
0 I
0 I
0 I
Note
2018111-336 Rev. B