GE eBike III basic Series Service Manual page 70

a "o : a
lIgnMent uput nalog
Note
• Analog outputs are not used with standard connection to
CardioSoft / Case / MAC/ 2000 / MAC 5500
The output voltage representing a special load value of the
ergometer is defined with this setting.
It is possible to adjust the voltage and / or the load value.
Select the parameter using the arrow keys and confirm by
pressing NIBP
Use the arrow keys to set the load value and confirm by
pressing NIBP.
Setting range:
GAIN:(voltage)
20 mV to 10000 mV in steps of 2 mV
GAIN (load)
20 to 999 Watt in steps of 10 Watt
a "o : a
lIgnMent utput nalog
The output voltage representing a special heart rate is
defined with this setting.
It is possible to adjust the voltage and / or the heartrate
value.
The setting is performed as described previously under
Alignment "Ouput: Analog Load value"
Setting range:
GAIN (voltage):
GAIN (heartrate):
- 70 -
l "
oad value
H "
eartrate
500 to 2000 mV in
2 mV steps
50 to 250 bpm in
10 bpm steps
eBike III basic / comfort
OUTPUT 1 Load
GAIN
GAIN
EXIT
OUTPUT 1 Load
GAIN
GAIN
EXIT
a „
lignment of analog output load
OUTPUT 2 Heart
GAIN
GAIN
EXIT
3000 mV
300 Watt
3000 mV
300 Watt
"
1000 mV
♥
100
2018111-336 Rev. B