Figure 3.10 Front View Of The Mp40; Table 3.3 Ports And Leds Of The Mp40 - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
3.2.4 MP40 LEDs
The front view of the MP40 board is shown in the picture below.
The MP40 front panel components have the functions below:
Ports & LEDs
LINK21~LINK23,
LINK31~LINK33
MISC1~MISC2
SD / Smart Media /
MMC+
LAN
SIO
RST
RUN LED

Figure 3.10 Front View of the MP40

Table 3.3 Ports and LEDs of the MP40

Function Description
Connection ports between MP40 and LP40s in the first and second expansion
cabinets.
Ports that connect external music sources, paging device, loud bell, common
bell, and door bell when the optional MIS daughterboard is installed.
Port for installing the 32MB Smart Media card. This card contains the main
system software. The MMC+ contains 64MB of storage and the SD contains 1
GB.
Port for establishing the 10 Base-T/100 Base-Tx Ethernet connection
Serial port (Samsung Engineering Use ONLY)
Button for resetting the MP40 board
This LED indicates the status of the MP40
- Off: No power
- On (Green): On booting
- Blink (Green): Normal Operation of program
The blink cycle is 500ms while running S/W
3.10
Home Page Home Page Table of Contents Table of Contents
INSTALLATION
PART 3 MAY 2010