Samsung OfficeServ 7400 Technical Manual page 47

OfficeServ 7400
TECHNICAL MANUAL
 See Section 7.1.2 for port Pinout/Wiring.
 Do not connect devices with a total REN greater than 5.0 to this card.
3.3.11 8SLI/8SLI2
This board provides 8 ports for connecting analog stations. It can go into universal slot of any
cabinet. Add as many as needed. This card automatically detects DTMF or dial pulse signals
from SLT. This card does not have any DTMF receivers; it uses system resources. If there is a high
concentration of SLI boards, an MFM or CRM daughter board must be added to the LP40 to
relieve congestion.
FRONT VIEW OF 8SLI/8SLI2
The front view of the 8SLI/8SLI2 board is shown below:
Figure 3.31 Front View of the 8SLI
Figure 3.32 Front View of the 8SLI2
3.31
Home Page Home Page Table of Contents Table of Contents
INSTALLATION
PART 3 MAY 2010