Samsung OfficeServ 7400 Technical Manual page 117

OfficeServ 7400
TECHNICAL MANUAL
CONNECTING TO THE KDBS
There are two methods for connecting devices to keyset daughterboards. The simplest
method is to connect the second device directly by means of a line cord.
7.16.
The second method is to use a multi-pair station cable, connecting separate station jacks to
the first two pairs. A line cord can now be connected between the daughterboard and the
second jack. This returns the daughterboard port to the MDF for cross-connection to another
cable run (see Figure 7.17).
Figure 7.17 Connecting a Station Device to a KDB via MDF
7.13
Home Page Home Page Table of Contents Table of Contents
INSTALLATION
PART 7 MAY 2010
See Figures 7.15 and