Samsung OfficeServ 7400 Technical Manual page 88

OfficeServ 7400
TECHNICAL MANUAL
CARD Name
16DLI2 2-Line LCD Keyset
Analog Phone
16SLI2
16MWSLI
MW Phone
ITP-5021D, ITP-5107S, ITP-5121D
ITP-5112L
PLIM/PLIM2 or
SMT-R2000 Dual AP
GPLIM
SMT-i3105
(current drawn
SMT-i5210
from connected
SMT-i5220, SMT-i5230
devices)
SMT-i5243
SMT-i5264
GWIM/GWIMT
DATA
(current drawn GSIM/GSIMT
from modules)
GPLIM/GPLIMT
IF ADDING GPLIM/GPLIMT/PLIM/PLIM2 CONNECTED DEVICES, GWIM/GWIMT OR
GSIM/GSIMT MODULES CAUSE CURRENT DRAWN TO EXCEED 6600mA PER CABINET (not
per system), THEN YOU MUST CONNECT THE OS7150 EXTERNAL PoE POWER SUPPLY
MODULE TO THE CABINET.
It is important to note that the OS7150 can only provide additional power to the PLIM, PLIM2,
GPLIM/GPLIMT, GWIM/GWIMT and GSIM/GSIMT. The OS7150 is used when the GSIM/GSIMT,
GWIM/GWIMT or PoE devices connected to GPLIM/PLIM causes the total current draw per
cabinet to exceed 6600mA. It does not provide power to DLI ports, MWSLI ports and other
system interface cards.
The internal jumpers must be set correctly for the four modules mentioned above to use the
external OS7150 PoE power supply.
PRODUCT SAFETY
Electric Shock
Make sure to turn this product OFF when handling this product. Handling this product with
AC power ON may cause electric shock.
Table 5.1 Consumption Per Device
Device
Type
5.3
Home Page Home Page
INSTALLATION
PART 5 MAY 2010
Current Consumption
for Each Device (mA)
25
25
30
100
130
200
83
127
107
156
100
450
320
35
Table of Contents Table of Contents