Samsung OfficeServ 7400 Technical Manual page 134

OfficeServ 7400
TECHNICAL MANUAL
HOW TO CONNECT TO A PHONE
1. Separate the cradle at the back of the
phone.
2. Mount the Gigabit Adaptor onto the
back of the body.
NOTE: The back of the Gigabit Adaptor
is sharp, so take care to avoid injury.
When you connect the Gigabit Adaptor
to the IP phone which is currently in use,
disconnect the PC cable connected to
the IP phone, and connect it to the G-PC
port of the Gigabit Adaptor. This will
leave the PC connection port, usually
used for the IP phone, vacant.
7.30
Home Page Home Page Table of Contents Table of Contents
INSTALLATION
PART 7 MAY 2010